PROFUNDO

Leksika bosanskog jezika

INOVACIJE

DOMOTIKA SUP. DRIVERS

Salih CAVKIC

INOVATION
RACUNAR

HELP

SUNCANI BOJLER

OVERCLOCKING LANGUAGE CODES BH INOVATORI

Na startnu stranicu  


Digiwave AR-500
Plus Programmable Antenna Rotator


Digiwave AR-500 Plus Programmable Antenna Rotator With Remote Control
 

Product Features:

  • CONTROL UNIT
  • Compatible With Most Universal Remote Controls (including satellite)
  • Non-Volatile Memory – Holds Locations During Power Failures
  • Automatic Synchronization Ensures Pinpoint Position Accuracy
  • Direct Access via TV Channel Number or Digital Compass Location
  • Unobtrusive Control Blends With Any Décor
  • DRIVE UNIT
  • One-Piece Cast Aluminum Housing
  • Heavy-Duty Rotator Motor
  • Wind-Tested Brake Pads
  • Durable Powder-Coat Paint Finish
  • Precision-Cut Gear System
  • Built-In Steel Thrust Bearings
  • With 12 channels memory station keys, 2 digital displays:1 for channel station indicator, 1 for direction indicator.
  • Manual key controls rotation to antenna.
  • Power operation returns to o automatically.
  • One touch choice.
  • Memory function continues to function when power is off.
  • Operation with infrared remote control and manual. Remote range is the same as for TV, about 10 meters.
  • Learn key: have the function to measure the time of driver running at one cycle.
Model# AR-500 plus
POWER SOURCE 120VAC, 60HZ, 26W
MOTOR 18VAC
ROTATION 360 °± 10°WITH MECHANICAL STOP
ROTATION TORQUE 182 kg-cm (160LBS-IN) MIN.
ROTATION TIME 80 SEC.
VERTICAL LOAD 36 Kg (99 LBS) MAX.
MASTER SIZE 28 ~ 44.5 mm (11/3 ~ 1 ľ”) DIAMETER
CABLE 3 CORD
DIMENSION (mm) 300x200x185 (GIFT BOX)
WEIGHT (g) 3900 (INCLUDING GIFT BOX)

Additional Information:

A Rotor or Rotator is a mast-mounted, motor-driven device that permits the TV viewer to conveniently rotate (orient) the outdoor antenna in any direction to optimize reception of a desired TV channel. A rotor should be considered when TV signals are being derived from broadcast towers in different directions and a single antenna cannot accommodate all locations.

A rotator consists of two parts: 1) an indoor control unit, and 2) an outdoor drive unit. The two are connected via a multi-conductor wire that carries the voltage and control signals from the indoor unit to the outdoor drive unit.



AR1 Programmable Antenna Rotator with Remote Control Centronics AR-500XL Outdoor for Local TV Off-Air Television Signal Reception, Part # AR500XL

Programmable antenna rotator digital display controller unit: compact unit allows you to assist program antenna position for clear crisp reception. Infrared remote control: control antenna directions with the touch of the button from your armchair to change channels easily.

IR Remote:

  • 16 function soft-touch key pad remote
  • Manual positioning key provides fine tuning for locations not stored in memory

Programmable Memory:

  • Pre-set to 12 TV/FM station directions for automatic antenna positioning
  • Learning key shown the time of one rotor cycle

Digital Display Controller:

  • Microprocessor controlled with 18 functions
  • Digital display indicates antenna position during operation
  • 3-Conductor wire installation

Motor Drive:

  • Heavy duty rotor motor
  • Wind and cold tested
  • Built-in steel thrust bearing
  • Precision metal gears
  • Weather proof one-piece housing
  • UL Listed

It operates on 18 V. Up to 280' of 20AWG 3-conductor cable may be used. For long runs, use heavy gage wire.


INDIA - National Award-2010-11

MEĐUNARODNE FINANCIJE

INNOVA "Eureka" u Evropskoj metropoli u Briselu

NIKAD VEĆI USPJEH BH. INOVATORA!

Zlatne medalje za bh. inovatore u Kini

POZLAĆENA BUGOJANSKA BRAVA

Izložba inovacija u Nirnbergu: 11 medalja za inovatore iz BiH

Zloupotreba intelektualne svojine u Bosni i Hercegovini


Za više informacija obratite se pitanjima na email: info@orbus.be (samo za članove ORBUSA)
 



Copyright by Cavkic, Belgium
Zabranjena svaka publikacija, kopiranje i distribucija bez dozvole.
Page Construction: 17/12/2011- Last modified: 09/08/2016